document number: 40119 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 19-jan-10 1 t antamount ? low esr, hi-rel cots, built in fuse conformal coated t98 vishay sprague features ? high reliability; weibull failure rate grading available ? surge current testing per mil-prf-55365 options available ? ultra-low esr ? terminations: snpb, standard. 100 % tin available ? circuit protection for mission or safety critcal systems ? fuse characteristics: guarant eed fuse protection at 9 a, 100 ms ? compliant to rohs directive 2002/95/ec performance characteristics operating temperature: - 55 c to + 85 c (to + 125 c with voltage derating) capacitance range: 15 f to 1500 f capacitance tolerance: 10 %, 20 % standard voltage rating: 4 wvdc to 63 wvdc * pb containing terminations are not ro hs compliant, exemptions may apply ordering information t98 r 227 k 020 e s a type case code capacitance capacitance to l e r a n c e dc voltage rating at + 85 c termination/ pac k ag i n g (available options are series dependent) reliability level surge current see ratings and case codes table. this is expressed in picofarads. the first two digits are the significant figures. the third is the number of zeros to follow. k = 10 % m = 20 % this is expressed in volts. to complete the three-digit block, zeros precede the voltage rating. a decimal point is indicated by an "r" (6r3 = 6.3 v). e = sn/pb solder/7" (178 mm) reel l = sn/pb solder/7" (178 mm), 1/2 reel c = 100 % tin/7" (178 mm), reel h = 100 % tin/7" (178 mm), 1/2 reel y = sn/pb solder, side mounted, 7" reels s = 40 h burn-in z = non- established reliability a = 10 cycles at + 25 c b = 10 cycles at - 55 c/+ 85 c s = 3 cycles at 25 c dimensions in inches [millimeters] case code l w h1 h f (ref.) d (ref.) j (max.) e 0.299 0.012 [7.6 0.3] 0.181 0.016 [4.6 0.4] 0.177 0.016 [4.5 0.4] 0.165 0.016 [4.2 0.4] 0.079 [2.0] 0.256 [6.5] 0.004 [0.1] f 0.299 0.012 [7.6 0.3] 0.246 0.016 [6.2 0.4] 0.207 0.016 [5.2 0.4] 0.193 0.016 [4.9 0.4] 0.079 [2.0] 0.248 [6.3] 0.004 [0.1] r 0.299 0.012 [7.6 0.3] 0.246 0.016/- 0.024 [6.2 0.4/- 0.6] 0.162 0.016 [4.1 0.4] 0.150 0.016 [3.8 0.4] 0.079 [2.0] 0.248 [6.3] 0.004 [0.1] v 0.299 0.012 [7.6 0.3] 0.181 0.016 [4.6 0.4] 0.099 max. [2.5 max.] 0.087 [2.2] max. 0.079 [2.0] 0.256 [6.5] 0.004 [0.1] z 0.299 0.012 [7.6 0.3] 0.246 0.016 [6.2 0.4] 0.258 0.016 [6.5 0.4] 0.244 0.016 [6.2 0.4] 0.079 [2.0] 0.248 [6.3] 0.004 [0.1] m 0.327 [8.3] max. 0.268 0.016 [6.8 0.4] 0.161 0.016 [4.1 0.4] 0.150 0.016 [3.8 0.4] 0.079 [2.0] 0.248 [6.3] 0.004 [0.1] h 0.315 0.012 [8.0 0.3] 0.268 0.016 [6.8 0.4] 0.224 0.016 [5.7 0.4] 0.213 0.016 [5.4 0.4] 0.079 [2.0] 0.264 [6.7] 0.004 [0.1] note ? only nominal values change . tolerances remain the same d h1 h l w w h1 h f j tantal u m w ire n i b identifies anode (+) terminal
t98 vishay sprague t antamount ? low esr, hi-rel cots, built in fuse conformal coated www.vishay.com for technical questions, contact: tantalum@vishay.com document number: 40119 2 revision: 19-jan-10 note ? all ratings are preliminary, c ontact marketing for availability ratings and case code f 4 v 6.3 v 10 v 16 v 20 v 25 v 35 v 50 v 63 v 75 v 10 15 e/r 22 rf 33 f 47 rz 68 r 100 150 f 220 e r m 330 v e h 470 v e e 680 e e r 1000 e/r r 1500 r 2200 standard ratings capacitance (f) case code part number* max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) (preliminary) max. esr at + 25 c 100 khz (m ) max. ripple 100 khz i rms (a) 4 wvdc at + 85 c, 2.7 wvdc at + 125 c 470 v t98v477(1)004(2)(3)(4) 19 8 130 2.2 680 e t98e687(1)004(2)(3)(4) 27 6 125 2.9 1000 e t98e108(1)004(2)(3)(4) 40 8 120 3.3 1000 r t98r108(1)004(2)(3)(4) 40 8 118 3.7 1500 r t98r158(1)004(2)(3)(4) 60 8 115 4.1 6.3 wvdc at + 85 c, 4 wvdc at + 125 c 330 v t98v337(1)6r3(2)(3)(4) 21 8 135 2.0 470 e t98e477(1)6r3(2)(3)(4) 30 6 130 2.7 680 e t98e687(1)6r3(2)(3)(4) 43 6 125 2.9 1000 r t98r108(1)6r3(2)(3)(4) 63 8 120 3.5 10 wvdc at + 85 c, 7 wvdc at + 125 c 330 e t98e337(1)010(2)(3)(4) 33 6 135 2.5 470 e t98e477(1)010(2)(3)(4) 47 6 128 2.8 680 r t98r687(1)010(2)(3)(4) 68 6 128 2.9 16 wvdc at + 85 c, 10 wvdc at + 125 c 220 e t98e227(1)016(2)(3)(4) 35 8 140 2.3 notes ? all ratings are preliminary, c ontact marketing for availability * contact factory for availability (1) capacitance tolerance: k, m (2) termination and packaging: c, e, h, l (3) reliability level: s, z (4) surge current: a, b, s
document number: 40119 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 19-jan-10 3 t98 t antamount ? low esr, hi-rel cots, built in fuse conformal coated vishay sprague notes ? all ratings are preliminary, c ontact marketing for availability * contact factory for availability (1) capacitance tolerance: k, m (2) termination and packaging: c, e, h, l (3) reliability level: s, z (4) surge current : a, b, s capacitance (f) case code part nu mber* max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) (preliminary) max. esr at + 25 c 100 khz (m ) max. ripple 100 khz i rms (a) 20 wvdc at + 85 c, 13 wvdc at + 125 c 220 r t98r227(1)020(2)(3)(4) 44 8 180 1.8 330 f t98f337(1)020(2)(3)(4)* 66 10 200 1.4 25 wvdc at + 85 c, 17 wvdc at + 125 c 68 r t98r686(1)025(2)(3)(4) 17 6 200 1.6 150 f t98f157(1)025(2)(3)(4) 38 8 180 1.8 220 m t98m227m025(2)(3)(4) 55 8 200 tbd 35 wvdc at + 85 c, 23 wvdc at + 125 c 47 r t98r476(1)035(2)(3)(4) 17 6 180 1.8 50 wvdc at + 85 c, 33 wvdc at + 125 c 15 e t98e156(1)050(2)(3)(4) 8 6 400 0.8 15 r t98r156(1)050(2)(3)(4) 8 6 350 1.0 22 r t98r226(1)050(2)(3)(4) 11 6 270 0.8 33 f t98f336(1)050(2)(3)(4) 17 6 250 0.8 47 z t98z476(1)050(2)(3)(4)* 24 6 245 1.1 63 wvdc at + 85 c, 42 wvdc at + 125 c 22 f t98f226(1)063(2)(3)(4)* 14 6 300 0.9 standard ratings
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
